All my photos are REAL and show an actual 3D-printed figure photographed by me.

This figurine is hollow inside, which opens up various possibilities for its use - for example, with a light inside, it can serve as a lamp. 

[ Suggested Print Setup ]
Nozzle: 0.4mm
Layer Height: 0.2mm ( You can adjust the layer height based on how much detail you want ) 
Infill: 5%
Wall loops: 3
Supports: Tree (auto)
Printed with: Bambu Lab PLA Matte Charcoal
 
As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.