These strong, reusable plant stakes are designed to help support stems and keep plants upright as they grow. Whether you're dealing with seedlings or mature plants starting to lean under their own weight, these supports offer a clean, minimal solution for gardens or indoor pots.

This set includes four sizes to suit different plant heights and needs:

Large – 205mm

Medium – 165mm

Small – 125mm

Extra Small – 80mm

The design is sturdy enough for repeated use and blends nicely into your garden or potted plants.

Print Settings

To ensure durability—especially for outdoor use—I recommend printing these in PETG. It withstands sunlight and temperature changes much better than PLA, which can become brittle or degrade over time when exposed to UV or cold.

Material: PETG recommended; PLA possible

Infill: 20% Gyroid

Perimeters: 7

Top/Bottom Layers: 7 top, 5 bottom

Supports: Not needed

Layer Height: 0.2mm

Orientation: Print flat side down on the bed

Notes

These were designed for ease of use and to avoid damaging plant roots during insertion. Simply press into the soil next to the plant and secure the stem with soft ties, clips, or twine.