Update 8/9/25- Based on some feedback the starting gcode was not mimicking the original profile from the K1 Max. I changed it and uploaded v8.  PLEASE PLEASE PLEASE leave feedback! I want to make sure this is working and not useless to everyone. I cam unable to test this as I do not have a smaller K1 machine. I can only rely on YOU THE COMMUNITY to tell me if it working or it is not. Thank you in advance! Happy Printing!!!

Update 7/11/25- Made another change editing the y axis value of the printable area. After the CFS upgrade as per the Creality Wiki you lose 5mm of printable space on the Y axis. On my K1 Max I had to change this as well bc I was getting a “Y Coordinates out of bounds” error. The New Build area is 220 x 215 x 250.

Please leave a comment if this is working or not I try to update these profiles as soon as I get feedback from the community that there is an issue. Thanks!

Update: 7/2/25 Made some changes in the file based off feedback from other users. As always , please let me know if you have an issue and I will try to correct it. As previously stated I do not have a smaller k1 machine to test this profile and I am only able to find out its success from YOU! Please leave a comment whether it's good or bad and I will try to work to fix any issues.  Thanks in advance!

Update 6/20/25 Thanks to user EdgarJTk for testing this and making some adjustments to Gcode and other options. I have taken down v4 and uploaded v5 for people to try. This has changed the gcode for the filament swap along with turned off manual filament changes and turned on the Prime tower. As stated previously, I do not have a smaller K1 machine so I cam unable to test this. Please if there are any issues, please post a comment so I can fix it. I want this to help as many people as possible and NOT cause issues. Good luck!

Update: 6/10/25 New file has been uploaded as user Seastone Stu edited the gcode to now allow the Upload and Print feature in Orca to work. If you see him around, give him a thank you! 

I also edited the file as some users were saying it was making there machine act as a K1 Max. I based this off of the stock K1C profile in Orca and made the gcode changes.

PLEASE let me know if it is not working! I want to make sure I am not providing bad files for anyone's machine. Thank you!!

It was requested that I upload a modified version of my K1 Max profile to work with the new upgrade kit and CFS in Orca Slicer. Please note that I do not have any way of testing this as I do not own one of those machines and will have to base its success on your feedback and comments. Please let me know if it works or not, I do not want to leave up a bad profile. I take no responsibility for any potential damage. Use at your own risk.

This profile was created using Creality's K2 Plus profile/gcode for Orca Slicer. The big issue was that we couldn't get the CFS to work properly on Orca slicer, manually having to do all filament swaps. 

Please note: You will only be able to UPLOAD from Orca slicer to utilize the CFS. You will need to start the print from Creality Print on your computer OR your printer's screen.

I also included a quick 1 layer high test print to check your printer and CFS will work properly. Once you are satisfied Id suggest saving the printer with a new name and transferring all the values for this new profile.