This popper requires some weights. You can use split shots but I recommend using a ¼" slingshot ammo or a ¼" ball bearing. This is a very detailed topwater popper which should be printed mouth down with some custom supports for the most detail or you can print it face down with some minor losses in detail. To get the other side of the popper you will need to copy and paste so you have 2 poppers of the same side. Then right click on one of the poppers and press mirror then along the x axis or y axis

Print Settings 

• Infill 3%
• Layer Height 0.1mm
• Custom Supports-Depends on orientation 

Let me know if you have any questions or concerns and as always thank for considering printing and have fun!

(Update 2025-06-16) Created deeper and slightly wider wire slot.