As our Tempus monitors do not come with the cable minders one would typically find on other cardiac monitors out there, I decided to look around and see if anyone had made something that would work. Despite trying multiple different clips out there, none of them really worked for our use case and were a little too bulky or too tight.  These are designed to be as easy to use as possible and are quickly removable for proper decontamination with minimal fuss.

These are designed with 3.75 mm channels for the cables; if you need a different size or configuration of holes, I am glad to make some tweaks for you! 

Absolutely no commercial use of this model or its derivatives is allowed without expressed consent.  

Printing

• PETG is optimal for reduced friction. 

• Parameters

  • 0.4 mm nozzle

  • 0.2 mm layers

  • 3 Perimeters

  • ~20% Gyroid infill

  • No Supports or brim needed!