3D print FDM
basically all forms of PLA
our print settings for PLA:
0.2 layer height
3 wall with 20% infill
print speeds slowed down to at least 80 and 200 mm/s for outer and inner walls
cooling fans at max for overhangs
no supports needed
For best print results slow down your print speeds and make sure you seams are not all aligned at the front of the top points along the body, don't try to rush this print or you will have quality issues towards the end when printing larger scale
message me with questions
The Articulating Demon Dragon - Articulated Dragon
by LaborTeck · original on Printables ↗
Toys & Games / Other Toys & Games
♥ 251⬇ 3.2k🖨 14 prints
Print profiles
The Demon.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
The Demon.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print