All the other comb models I found here had equally spaced teeth. This is a classic dual-density comb, with wider and thicker teeth on one side for thicker or wet hair, and finer, more narrowly spaced teeth on the other side for dry hair, fine styling, and smoothing.

Printed in PLA.

Tips for Printing

The settings in the 3MF project file are for Prusa MK4S. When printing on a different printer, keep this in mind:

• Ensure that your bed is properly leveled.
• Slow down your first layer and perhaps rise the temp by 5-10°C if your first layer does not properly stick to the bed.
• Slow down the print.
• Measure precisely your filament's actual thickness and set that value to your slicer settings (there should be a filament thickness that is currently set to 1.75mm).
• Use PLA or PETG.