Geometric HORSE Figurine

Printed with fuzzy skin effect.

Fuzzy Skin: All Walls
Fuzzy Skin Point Distance: 0.35
Fuzzy Skin thickness: 0.2

If you're interested in the commercial use of my models, check the link to my Patreon https://patreon.com/29flo

All my photos are real and show an actual 3D-printed figure photographed by me.

As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.