3D dragon model created from an image generated using Meta AI and Backflip AI.

Successfully printed on a Bambu A1 and an Ender-3 V3 KE.

Print using:

.2mm layer height

3 walls 

5 top shell layers

4 bottom shell layers

15% Gyroid Infill (for best strength)

Support:

Tree Auto/Tree Organic

On Build Plate Only

1 Raft Layer

Generic PLA Filament (3DHoJer PLA PRO white using standard 220C/65C temps and Overture PLA grey  blue were tried)

If you encounter stringing or adhesion issues change the temps to the recommended values for your filament.

Carefully remove supports starting at the top edge of wings and head with wire snips or needle nose pliers.

Breaking the tree structure in parts may work better before detaching from model. Be especially careful with

the ones on the bottom and around the back feet.