This remix of the original Silakka54 case has the following differences:

case bottom is now solid
case top has been integrated into the case bottom
case sides walls has been reduced by 50%
case walls are now shorter and matches the height of the top plate
removed the screw holes and replaced with studs for the MCU cover
PCB friction fits into the case
MCU cover friction fits into case studs
inner frame to support the pcb and top plate for outer edges

You may want to experiment with printing the mcu covers at different angles to get the optimum print quality.

I used the ironing function with ironing speed of 65mm/s and ironing flow rate of 22% with spacing of 0.15 to get a nice top surface finish.

Note: This model currently only fits the AliExpress pcb plates up to v1.2. The newer v1.3 pcb plates are slightly larger around the MCU controller.

Will be making an updated model to work with v1.3 in future.

Slim Silakka54 screwless case

by Johnny5iv · original on Printables ↗

Gadgets / Computers

♥ 57⬇ 1.0k🖨 7 prints

License: GNU General Public License v2.0 ↗casekeyboardmechanicalkeyboardergonomicergosilakka54

Print profiles

silakka54_mcu_right.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
silakka54_top_bottom_right.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
silakka54_top_bottom_mcu_left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
silakka54_mcu_left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
silakka54_top_bottom_mcu_right.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
silakka54_top_bottom_left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
silakka54_inner_frame.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print