If you can't leave home without your nozzle, why not attach them to whatever string is attached to your clothes ?
Make in the picture was printed with Prusament Viva La Bronze.
Print settings
Model is optimized for printing, just add a little brim to be sure, no need for supports.
| Material | Any material should be fine |
| Nozzle | 0.4mm or smaller |
| Layer height | 0.15mm or smaller |
| Perimeters | 3 |
| Shell | Top: 3 Bottom: 3 |
| Infill | 10%, any infill pattern should work |
| Skirt/brim | ~6mm brim |
| Support | No |
| Speed | Medium to slow, quite a small and delicate model |
| Options | I had great success with enabling: “Avoid crossing perimeters” “Automatic infill combination” |
Nozzle Beads
by Zortium 3D · original on Printables ↗
Fashion / Other Fashion Accessories
♥ 773⬇ 674🖨 21 prints
Print profiles
Nozzle.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print