Mini Surron Fingerbike!

Want to bring your Surron with you everywhere? Well, now you can. Assembly for this model is kind of tricky but you can do it!

Tools Required:

• Hot Glue Gun
• Super glue

Materials Required:

• 1 Spring from Pilot G2 pen(or similar): https://www.amazon.com/Pilot-Retractable-Premium-Roller-31020/dp/B001GAOTSW/
• 2Springs from Uniball 207 Plus+(or Similar): https://www.amazon.com/uni-ball-Retractable-Black-0-7mm-Medium/dp/B0B4BJR5X3/
• 1 Storebought Smore Stick(about 5mm outer diameter)(these should work but I have not tested): https://www.amazon.com/NadaKin-Marshmallow-Roasting-Skewers-Barbecue/dp/B083VRLMKJ/
• 1 paper straw(about 6mm outer diameter)
• 2 barbeque skewers(these should work but I have not tested: https://www.amazon.com/BambooMN-Brand-Premium-Bamboo-Skewers/dp/B007SXC1W2/

Assembly Instructions: (I may add a video later but I do not have time)

1. Hot glue in a piece of barbeque skewer to attach the swing arm to the frame
2. Superglue the wheel haves together with the flat-sided wheels together and the rounded sides wheels together.
3. Superglue the 2 smaller glasses brackets to the top and bottom of the steerer tube
4. glue a about 1.5 inch piece of smore stick(Changes depending on your springs) to each side of the steerer tube through the glasses brackets
5. cut 2 about 1-inch sections of the paper straw(Changes depending on your springs) and press them into the two larger glasses brackets, secure them with a small amount of glue.
6. Use 2 thin springs from the Uniball pens and glue them to the bottom of the smore stick stanchions with a small amount of hot glue, make sure that there is no glue past the diameter of the stanchions.
7. Press the assembly with the straw pieces over the springs and put a pea-sized amount of glue in the small fork boots(circular items with a cylinder going across the diameter) and press them over the springs and straws binding the bottom of the fork together.
8. Hot glue the spring from the Pilot G2 pen to the swingarm and to the bottom of the seat.
9. Attach the wheel with flat sides to the fork with a piece of barbeque skewer through the fork boots. attach the second wheel to the swingarm through the holes at the back.
10. Have Fun!