Fully 3d printed slide shoes, remixed from MakerVerse Designs

• printed with TPU (I used eSun eTPU-95A Rainbow)
• probably TPU 90a or so is more comfortable, but also more difficult to print

My print settings:

• Infill: 10%
• Infill Pattern: Gyroid
• Wall loops: 2
• Outer brim: 10mm
• Avoid crossing walls: True

Important notes:

• It is for EU shoe size number 43 (male), but you can scale them to your size (use uniform scaling)
•  
• 
  If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed

There are two ways to print this:

1. Use a textured PEI bed and print it standing up without support (It works very well, especially with printers where the bed is not moved so much, such as P1S, P1P X1,…)
    
2. Or use another not so sticky bed and print it standing up with support (recommended for A1 or similar printers)

Have fun printing!
Stay ceative!