Designed for the Apache 1800 case, for one NVX® NSP46 4" x 6" driver.

.step files are included if you wish to mod them for different drivers.

The outer trim requires 6 m4 heat set inserts, and is mounted with 6 m4x8mm screws.

The jig has all of the holes required to be drilled to mount the trim and speaker, along with a cutout to follow.

Speaker and gasket spacer are meant to be mounted from under the lid inside of the case with m4 screws. (locking nuts recommended)

The grill and trim under grill are loaded into the outer trim and then bolted to the case from inside the lid.

Apache 1800 single NVX 4x6 speaker grill and trim

Gadgets / Audio

♥ 56⬇ 527🖨 2 prints

Print profiles

seal.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
jig.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
grill.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
outer trim.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
behind grill.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print