Update 14.3.2025
- improved lower screws for better durability
- improved threads for easier rotation
Update 28.3.2025
- Extended screws for attaching to the table
- Increased thickness of the main bolt cotter pin
Table vise for table of maximum thicknes 50mm
- Use grease or petroleum jelly for threads.
- The span of the handles is 130mm.
- Mnimum thick of desk is 25mm
- Use rubber or foam tape betwen table and mount for better adhesion.
3D printing settings
- Printed from PETG.
- print settings are written for each stl file
- YES really print Lower Screws in position like on photo for better layer cohesion.
You can also use additional area for vise. Link here
Table vise
by 43D PRINT · original on Printables ↗
Hobby & Makers / Tools
♥ 502⬇ 2.0k🖨 4 prints
Print profiles
table vise parts 2 - (0,2 layer, 6 walls, 30% infill, organic tree supports 25 degrees).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
table vise parts 3 - (0,1 layer, 6 walls, 30% infill, organic tree supports 25 degrees).stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
table vise pats 1 - (0,2 layer, 10 walls, 30%infill, organic tree supports 25 degrees).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print