Check LOG bellow for changed parts!
_
INTRODUCTION
This controller is a 3-axis + 15-button HID, designed with Euro Truck Simulator 2 in mind. It also works with other games.
The steering wheel has 900 degrees of rotation and force feedback, and the two pedals are analog.
Of the 15 buttons, 6 have special functions:
- Two are turn signal indicators.
- The ignition key slot functions with a rotating motion.
- The plus and minus buttons are each assigned to two functions. To access the second function on each, hold the cruise control button while pressing plus or minus.
- The T button is triggered on release, as holding it activates the configuration menu.
All other buttons are standard and trigger on press.
The key is removable and can be used to lock the pedals down, preventing them from being pushed or damaged when transporting the controller in a backpack.
The face of the steering wheel is removable by pulling it out. It is held in place with a magnet and three alignment pins, so it stays secure and can’t be mounted incorrectly.
_
STEERING WHEEL COLLECTION
Check the amazing collection of the community's steering wheel face designs!
Tested models
Model in review
_
LIST OF COMPONENTS AND 3D PARTS
https://docs.google.com/spreadsheets/d/1r9GoApVcAXdNRE7wuV-_QuwrFcKnSpb2g2DpkP0s-nU/edit?usp=sharing
(Make a copy if you want to use the check boxes)
_
CHANGE LOG
19-11-2025
- Add the “Steering PAD 900-F FreeCAD original Files 2.zip” file with the original FreeCAD files.
29-07-2025
- Add the “Steering Pad 900 F - board 3 V3.2.zip” file with the firmware for the controller.
- Add the “Steering PAD 900-F - board test V2.zip” file with the test code (this writes to the console also)
16-07-2025
- Add the “Steering Pad 900 F - board 3 V3.1.zip” file with the firmware for the controller.
(follow the instructions on the video to update it properly)
11-07-2025
- Update to the list of materials (Add two PH2, M3 12mm screws)
29-06-2025
- Add the “HRP.zip” file with high resolution pictures of the PCBs
28-06-2025
- Add the “Steering PAD 900-F PCB Assembly Diagram v4.pdf” file with the details of the electronic boards.
- Add the "Steering Pad 900 F - board test.zip" file with the code and libraries to test the board.
26-05-2025
- Update to the list of materials (Display name was wrong. the correct is 128x32)
13-05-2025
- Update of ToolSteeringAssembly
- Update of SteeringWheelFaceBase
_
NOTES
No notes for now.
_
SOCIAL MEDIA
https://www.instagram.com/homegamecoderbuilds/
https://www.youtube.com/@HomeGameCoderBuilds
_
DISCLAIMER
This is a personal project that I’m sharing for educational and demonstration purposes. I’m documenting and explaining how I built it, but if you decide to replicate or adapt this project, you do so at your own risk.
I cannot take responsibility for any damage, injury, or issues that may occur during the construction, modification, or use of the device. Make sure to handle all tools and electronic components carefully, follow basic safety procedures, and double-check everything before powering up.
If you’re unsure about any step or component, feel free to ask questions in the comments — I’ll do my best to help.
Steering PAD 900-F
by Home Game Coder Builds · original on Printables ↗
Gadgets / Video Games
♥ 150⬇ 2.2k🖨 6 prints
Print profiles
BB Key.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
BB InglitionSlot-Bottom.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
BB InglitionSlot-Top.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
BB PCBBoardBase.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Case TopFace.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Case BottomBox.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pedals Aligner.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pedals LockSupportTop.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pedals LockingArms.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pedals AcceleratorLever.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pedals LockSupportBottom.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pedals BrakeLever.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pedals Base.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pedals Faces.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stearing WheelBase.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stearing WheelLockingPins.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stearing WheelSensorLock.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stearing WheelSpiral.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Steering M4toM8.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Steering Pulley ff-50.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Steering Pulley ff-4.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Steering Pulley ff-20.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Steering SwingArm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Steering WheelTurningSignalHandle.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Tool 7mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Tool PedalSensorAligner.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Tool PinPuller.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Tool PinHolder.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Tool SteeringAssembly.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stearing WheelFaceBase.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Tool SteeringSensorAligner v2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MTBTW Tuscan.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Soff.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
TwoCV.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stearing WheelDefaultTruckFace.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stearing WheelSpiral V2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Tool Steering Face Magnet Screwer.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stearing Wheel Face Magnet Cover V2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stearing Wheel Face Base V2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stearing Wheel Rotation Limiter.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stearing WheelBase V2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
StearingWheelF1.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print