If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.

https://paypal.me/muddymaker

You will need six M3x30mm socket head fasteners for the main box and lid, four 2x25mm stainless steel dowel pins for the over centre latches and stow-able handle.

There is a secret hidey hole for emergency cash etc.

The lid requires supports for the storable handle section.

All the fasteners screw into the plastic. I used a ball end hex key to screw in the fasteners for easier installation. Do not over tighten the fasteners.

I used these dowel pins that can be found on Bambu Labs maker's supply section.

Internal dimensions are: L112mm W171mm H60mm.

External dimensions are: L121mm W180mm H78.

I recommend the latches be printed with a CF filled polymer or ASA,ABS @100% infill for strength and durability.

NB: All print files are in the correct print orientation.

Happy printing.

Cash Box

by muddymaker · original on Printables ↗

Hobby & Makers / Organizers

♥ 1.5k⬇ 4.1k🖨 14 prints

License: Creative Commons — Attribution — Noncommercial — NoDerivatives ↗boxorganizercasecontainer

Print profiles

Handle.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Latch A.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Secret Lid.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Latch B.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Coin Tray.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Top.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bottom.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print