Required Stls:
- 1x hinge_upper
- 1x hinge_lower
- 1x arm_upper
- 1x arm_lower
- 2x nut_block
- *4x plastic_spacer
*The plastic spacers go in the glass cutouts to align the panel and prevent the metal screw from touching the glass.
Required Hardware:
- 4x m3 8mm Socket Cap Screws (for side panel)
- 4x m3 12mm Socket Cap Screws (for glass panel)
- 2x m3 30mm Socket Cap Screws (for hinges)
- 6x m3 Nuts
- 4x m3 washers thickness between .5mm and .7mm (for arms)
- 4x washers from existing hinge
Installation instructions can be found in the files section if you need them. It seems newer batches of the CC have the hinges glued to the door. If yours are glued you will need to unscrew the original hinges before you can remove the door.
Notes: Print the plastic spacers with wall print order outer to inner, the rest can be printed inner to outer for better overhangs. .2 layer height
Some addons for the hinge can be found here: https://www.printables.com/model/1213120-extras-for-270-degree-hinge
270 Degree Hinge for Elegoo Centauri Carbon
by MagicShrimp · original on Printables ↗
3D Printers / Other Printer Parts & Upgrades
♥ 1.1k⬇ 9.5k🖨 49 prints
Print profiles
nut_block.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
plastic_spacer.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
hinge_lower.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
hinge_upper.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
arm_upper.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
arm_lower.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
nut_block_slim.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print