A wall-mountable case for the Raspberry Pi Touch Display 2 and a Raspberry Pi:
- Available in thick/thin premade versions
- With or without cooling vents
- Wall-mountable using screws or Command strips (I'm using the latter)
- Fully parametric and customisable using OpenSCAD (BOSL2 library required)
The thick version is 60mm thick, allowing room for any Pi HATs, but the thin version is 35mm thick, and comfortably fits a Pi and the display.
Printing
On my printer (Creality K1C), it prints fine in the flat orientation without any supports, although supports may be preferred for large cable holes. It may be preferable to use a larger infill for the thick case to make sure the screw standoffs are stronger.
Assembly
The M2.5 screws included with the Pi Touch Display 2 can be used to attach the Touch Display 2 to the case. It is also possible to use some double-sided tape around the screen bezel to make the assembly stronger.
Notes
You may need to use right-angled cables/adapters for some of the ports, especially the power/HDMI/audio ports.
Raspberry Pi Touch Display 2 wall mount case
by fbm3334 · original on Printables ↗
Gadgets / Computers
♥ 49⬇ 742🖨 1 prints
Print profiles
Case_thick_no_vents.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Case_thin_no_vents.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Case_thin_vents.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Case_thick_vents.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print