! IMPORTANT INFORMATION !

This version of the model is outdated and has been since improved to ensure higher probability of succesful prints, still with same assets. I would recommend you printing the new version, because many people had problems with the old one.

Download it here: https://www.printables.com/model/1294643-fidget-benchy-20

Print the Benchy and than have fun with 3 inbuilt fidget assets.

But it is still a torture test, now maybe even harder, so I don't recommend it to beginners.

Print settings:

• 0,15 mm layer height
• 15% infill
• no supports

Post printing:

1. Cut the brim of the benchy.
2. Apply some force to free the joystick. Be careful not to break anything else.
3. Carefully free the spring and the lever. Some force mightt be needed but be more careful about it than with the joystick.
4. Have fun with the Benchy! (But don't forget that the funnel might be a bit brittle.)