They are finally here, Â CPU cases for your organization needs!
Versions Included:
17XX 1851 Holder V12
20XX Holder V5
115X 1200 holder V8
AM4 Holder V11
AM5 Holder V8
Tools required:
Hammer
Extra Materials:
2 x 2D finishing nail 1" (25mm), or other ~1.75mm Rod
Printing:
Orientation: Flat sides on the bed
Works well in PLA and PETg.
normally use: 0.2mm, 0.25mm or 0.28mm layer height
Assembly:
Place the upper case so that it nests into the lower case
the hinge holes should be aligned
Insert nail/rod (point bit first) into hole
Tap in nail/rod with hammer till nail is seated
trim excess if desired
Repeat till all you cases are assembled, then happy organizing!
.STEP and .STL files are provided.
Change Log:
V11 17xx 1851 CPU: Increased clearance for LGA 1851 CPUs
V12 17xx 1851 CPU: Increased clearance for LGA 1851 CPUs in any orientation, and separated the two objects to be one click printable, reoriented model
LTT CPU Cases
by Linus Tech Tips · original on Printables ↗
Hobby & Makers / Electronics
♥ 580⬇ 3.1k🖨 28 prints
Print profiles
20xx holder v5.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
AM4 holder v11.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
AM5 holder v8.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
115x 1200 holder v8.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
17xx 1851 cpu holder V12.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print