Shadow Ninja Warrior Figurine
 

I added a modifier in 3MF file on its back leg that provides 100% infill in that area (if you using other slicer than Babmbu you need to add it by yourself if it not works) The model was a bit front-heavy, so I had to balance it out. However, even without this modification, it stands on its own on a hard and level surface.

Printed with Fuzzy Skin effect.
Fuzzy Skin: Contour
Fuzzy Skin Point Distance: 0.4
Fuzzy Skin thickness: 0.2

If you're interested in the commercial use of my models, check the link to my Patreon https://patreon.com/29flo

All my photos are real and show an actual 3D-printed figure photographed by me.

Read.me
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.