STL Files and more free models on: https://makerworld.com/en/@mishirostudio

Self-designed Pokeball for the 3D printer

Dimensions

I invested a lot of research and time to achieve the most realistic proportions possible. The diameter is 75mm, so it fits well in the hand.

Assembly

The ball consists of a total of 5 individual parts that are glued together. Optionally, the lid can simply be attached so that the ball can be used as a storage box

Additional supports

To ensure that the bow is printed without errors, I recommend printing the bow-shaped supports. These are 0.1 mm away from the actual shell of the ball so that they can be easily removed after printing by bending them. In my test prints, I have found that this produces better results than the conventional supports.

I am always open to suggestions for improvement! Have fun printing and catching wild Pokemon!