Cross Brace:

There are three STLs for your use: cross brace with cut area; cross brace pre-cut right side; cross brace pre-cut left side.
I moved the fan mount location to the corner, rather than the middle. This allowed for the addition of a cut area.
The resulting pieces can either be cut in your slicers with connectors added, and then glued. Alternatively, on the pre-cut pieces four holes that can be used for bolting. Holes are sized for M4 or #8 screws.
I've also added a “pin” that can be used to align the pieces of you don't want to bolt it.

Modular 10 Inch Server Rack - Reworked - 220 x 200 Bed Remixes

Gadgets / Computers

♥ 53⬇ 655🖨 4 prints

Print profiles

cross brace cut plane.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
cross brace - bolt left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
cross brace - bolt right.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
pin.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print