Parametric protective case/toolbox with a groove for an optional seal.

You can modify width, length, height, corner radius, screw hole size, hinge position, rib and box thickness.

Print settings

any rigid filament
0.2mm layer height
0.4mm nozzle
no supports needed
default infill
colored icon → emboss .svg icon in slicer (to same height as 1st layer) and manually swap color on 2nd layer

Assembly

You will need 6x30mm M3 screws. The tolerances should be just right by default, if not, heat or lubricate the screws a little. I recommend screwing them from the outer edge. For the seal, you can use a soft, 1.75mm TPU filament.

For icons I used, look here:

https://www.onlinewebfonts.com/icon/547002

https://www.svgrepo.com/svg/47967/pc-tower-and-monitor

https://www.flaticon.com/free-icon/repair-tools_82525

https://www.svgrepo.com/svg/159891/circuit

If you want a handle for the box, have a look here:

https://www.printables.com/model/84450-parametric-folding-handle

https://www.printables.com/model/75806-tool-box-handle-for-tool-box-parametric

Parametric protective case / toolbox

by s.mensak · original on Printables ↗

Hobby & Makers / Organizers

♥ 1.3k⬇ 4.3k🖨 12 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗parametricboxcasestorageprotectivetoolboxsturdytoolstoragesealed

Print profiles

bottom 20x20x4cm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
lid 20x20x2cm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
lid 15x15x2cm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
bottom 15x15x4cm.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
latch.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
bottom 20x10x4cm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
bottom 15x8x4cm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
lid 20x10x2cm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
lid 15x8x2cm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
latch.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print