This storage is meant for round magnets. At the screw cap the diameter is shown. Tip: if you put the first magnet upside down in the tube, the other magnets will be pushed out a bit.

The print files are for diameters of 10, 12 and 15 mm. There is also a parametric FreeCAD file in which you can change the diameter, the length of the tube and the text on the cap.

==================

Edit 2025-02-26
Threads tubes 6 and 8 mm refined.

Edit 2025-02-17
Made tubes 6 and 8 mm slightly bigger.

Edit 2025-02-10
Added tubes 6 and 8 mm.

Safe Magnet storage

by Mario M · original on Printables ↗

Hobby & Makers / Organizers

♥ 1.3k⬇ 2.2k🖨 29 prints

License: Creative Commons — Public Domain ↗

Print profiles

MagnetStorage_12mm-BUIS.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MagnetStorage_10mm-BUIS.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MagnetStorage_15mm-BUIS.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MagnetStorage_10mm-DOP.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MagnetStorage_12mm-DOP.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MagnetStorage_15mm-DOP.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MagnetStorage_6mm-BUIS.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MagnetStorage_6mm-DOP.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MagnetStorage_8mm-BUIS.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MagnetStorage_8mm-DOP.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print