Introduction
This model is part of my Solar System Lithophane Lamp Series. As of now, all planets and several moons of the solar system are available as lithophane lamps in five different sizes: ⌀295mm, ⌀205mm, ⌀150mm, ⌀75mm (this upload), ⌀25mm.
If you like my work, please consider supporting me. Your support will help me to make more models available for free. https://ko-fi.com/fritzpeppone. If you like to use my models commercially, please obtain a commercial license by joining my club. The commercial license includes all of my models except those that are based on the intellectual property of others (e.g. the GTA V map lamps) or remixes (e.g. the Death Star or Phobos lamps).
Requirements
The regular lamp size is ~ 75mm x 75mm x 70mm. There is also a “large” version in ~ 100mm x 100mm x 95mm available (so far only for the sun). They should print fine on all FDM printers and on most SLA printers. You will need around 30g-40g of Filament (preferably PLA or PLA+) for the regular sized lamp.
The lamps are mounted to their base with a M28x2 metric thread. The idea for the thread is from the Lithophane Moon Lamp with wide Screw Base by The Quicksilver. I am providing multiple different illumination options that all use the same thread. Choose the lamp of your liking and match it with any illumination of your liking. All compatible lamp bases are listed below. You may either need a standard E14 socket with a small LED, a Keystone socket, USB LED stick and a USB cable, an Ikea Solvinden fairy light or a magnetic button cell PCB with LEDs.
Print Settings
There are only a few settings you should tweak in the slicer to print the lamps.
Print in PLA or PLA+
Recommended layer height: 0.15mm
Use the Arachne Perimeter Generator for more precise printing with better details
If you use Arachne, set the minimum line width to 75% to avoid holes!
Set wall count to 5-6 to obtain a solid lamp
Set seam position to aligned
Activate Brim (Outer Brim Only) and set the Brim width to 5-10 mm
No Support required! The lamps print perfectly fine without support. All lamp bases come with in-built snap off supports (where required).
Only for Saturn with Rings: activate extra perimeters on overhangs to achieve a smooth bottom side
Be aware, that slicing and printing may take a very long time. The STL files can take up to 10 min. to slice.
For Bambu Studio users: Bambu Studio seems to struggle with the Arachne Perimeter Generator. If you are unable to slice a lamp with Arachne, use the Classic Perimeter Generator.
Also be aware, that both the lamps and the illumination options feature fine and intricate details and nasty bridging. Some printer tuning may be required for those prints.
This is not a SpeedBoatRace print! Use conservative print speed settings to avoid artefacts! It's totally fine if your print takes one or two days to finish.
Filament, resin and light source
Filament matters. A lot! Depending on your filament choice, your lamp may have more or less contrast or a warmer or cooler color temperature. You can also change the outcome by choosing light sources with different wattage or color temperature. Since the lamps are very small, you can also print them in resin. The picture below shows different outcomes depending on your filament type:
All of the four Panels above were printed with different white PLA/PLA+ filaments but illuminated with the same 1W LED bulb.
Before starting a multi-day print, I recommend printing the Solar System Lithophane Calibration Panel to test how your print will turn out. You are also by no means limited to white lights and filaments. Check the makes below to get inspired what color and light choices other makers made.
My personal favourite filament and the one I used for all lamps in my photos is Filament PM PLA+ White.
Your light source also matters! While you can use 1W bulbs with the E14 Socket, other illumination solutions such as the fairy lights have a way lower wattage. Filament PM PLA+ for example is still a good option for 1W bulbs but a very poor option for the fairy lights. Test your filament with the light source you intend to use!
Planet Lamps
The list below contains all (Dwarf)Planets of the solar system and the sun, turned into lithophane lamps. All of the lamps below are original creations.
There are versions with the thread at the south pole (for standing use) and upside down versions (USD) with the thread at the north pole (for hanging use).
The Sun | |
Mercury | |
Venus Atmosphere | |
Venus Surface | |
Earth Satellite | |
Earth Bathymetry | |
Earth Fishworld | |
Earth Political | |
Earth Political Bathymetry | |
Earth Topography | |
Mars | |
Jupiter | |
Saturn | |
Saturn with Rings | |
Uranus | |
Neptune | |
Pluto | |
Moon Lamps
The list below contains several moons of the solar system, turned into lithophane lamps. All of the lamps below are original creations.
There are versions with the thread at the south pole (for standing use) and upside down versions (USD) with the thread at the north pole (for hanging use).
The Moon | |
Io | |
Callisto | |
Europa | |
Ganymede | |
Other Lamps
The category "other Lamps" so far only contains two models.
Universe Expansion, shows a model of the big bang, as extrapolated by cosmic background radiation. The idea for this model was suggested by Printables user Markus and is based on image data by ESA, showing the cosmic microwave background of our universe.
The Death Star lamp a direct remix of Olivier Popiers Starwars deathstar lithophane lamp. I scaled it down to 150mm diameter while maintaining the wall thickness. Additionally, I added the M50 thread and an indentation for the ray.
There are versions with the thread at the south pole (for standing use) and upside down versions (USD) with the thread at the north pole (for hanging use).
Death Star | |
Universe Expansion | |
Illumination Options
Printing the Planet or Moon of your choice is only a part of creating your own bauble. You'll also need an illumination for your Planet or Moon. I am providing several different options, all with a matching M28x2 thread. All of the models below will work for all of the Planets and Moons. Depending on which illumination option you choose, you will need different hardware for assembly. You will find a detailed BOM and assembly instructions below.
All prints for the illumination options require a well tuned printer, perfect bridging and an excellent first layer, otherwise supports may fail or tolerances may be off. While the tolerances work for me and my printers, they may not work for you. Please let me know if you have issues. I can provide parts with different tolerances if required.
Links to shops are only suggestions on where you can find parts. I am not connected to any of the linked vendors and don't endorse them. Links are also supposed to show you how the required parts are called and look like.
Some lamp bases use snap-off support. The supports look like small ring segments, tabs or cylinders that should be removable with very little force and should leave you with a good surface. They are only tested with PLA/PLA+ filament. Using other filaments may make support removal more difficult.
Generic Fairy Light Socket | ||||||||
Compatible with almost all fairy lights out there. Easy snap-fit assembly, perfect for fairy lights. Maximum supported lamp diameter: 12.8mm Pros and Cons:
BOM:
Printed Parts: The generic sockets already include snap-off supports that worked very well for me. Try these first. If the built-in supports do not work for you, I also included files without supports (*_no_support).
Assembly:
| ||||||||
E14 Socket | ||||||||
The easiest, most straightforward illumination option. The threads on E14 sockets matches the lamps threads. Pros and Cons:
BOM:
Printed Parts:
Assembly:
| ||||||||
Magnetic Switch Button Cell | ||||||||
This option uses a small button cell PCB that switches on and off magnetically. Since there is no wiring required and the light can be switched on and off contactless, this is the perfect option for Christmas baubles. Pros and Cons:
BOM:
Printed Parts: The battery sockets already include snap-off supports that worked very well for me. Try these first. If the built-in supports do not work for you, I also included files without supports (*_no_support). Additionally, there is a version with a flat base available (*_FLAT) so you can place the lamp somewhere, for example as a nightlight.
Assembly:
| ||||||||
Ikea Solvinden | ||||||||
This option is modeled to be compatible with Ikea Solvinden fairy lights. The locking mechanism is identical with the Ikea one. Keep in mind, that the light output of those small LEDs is very low. Choose a very transluscent filament with this illumination option! Pros and Cons:
BOM: Printed Parts: The Ikea solvinden sockets already include snap-off supports that worked very well for me. Try these first. If the built-in supports do not work for you, I also included files without supports.
Assembly:
| ||||||||
Keystone USB | ||||||||
The final option allows you to power your light via USB. This may be a very good option for night lights. You can also modify the base to incorporate the lamps in other designs. Pros and Cons:
BOM:
Printed Parts:
Assembly:
| ||||||||
Tea Light Socket | ||||||||
Compatible with flickering LED Tea Light Candles. This type of candle seems to be generic, so most should fit. I cannot guarantee though that all LED tealights of the same style will fit. Pros and Cons:
BOM:
Printed Parts: The tea light sockets already include snap-off supports that worked very well for me. Try these first. If the built-in supports do not work for you, I also included files without supports (*_no_support).
Assembly:
|
Ideas for using the lamps
In addition to using the lamps as Christmas baubles or night lights, you may also use them for baby mobiles or for fairy lights. I'd love to see your ideas and creations. Please share your pictures of your makes and ideas.
Other models
If you are interested in Lithophane lamps, consider checking out my other models. Click the links below for the respective models or check my profile.Other models
Acknowledgements
A big shout out and thanks to:
moonournation: to my knowledge, the Lithophane Moon Lamp OP, the original creator who came up with the idea.
The QuickSilver: to my knowledge, the first person to add a thread to the moon lamp.
Frank Deschner: the person to popularize the Lithophane Moon Lamp and inspiration to start this collection.
Olivier Popiers: The creator of the Death Star Lamp I remixed.
Markus for suggesting the Universe Expansion Model and ESA for providing a equirectangular projection of the cosmic microwave background
positron design: the creator of the rings of saturn I used.
Changelog
10.12.2024 - initial upload
18.12.2024 - added support for D20 battery sockets
21.12.2024 - added link to the Wago T-connectors
23.12.2024 - added the generic socket option
26.12.2024 - complete overhaul of all sockets with improved supports
19.01.2025 - added link to the lithophane calibration panel and overhaul of the introduction and print settings suggestions.
19.01.2025 - renaming of the collection to match with the future aim of adding 150mm³ and 300mm³ versions.
24.01.2025 - added a link to the 300mm³ size version.
02.03.2025 - added earth bathymetry, earth topography, earth political bathymetry, europa, ganymede, callisto, death star and universe expansion models. Also added a link to the minimalist city map lamp collection. Also added upside down (USD) versions of most lamps
23.03.2025 - fixed some mesh issues with the upside down versions and added the tealight base
02.11.2025 - added a model of Saturn with Rings
Solar System Lithophane Planet Lamp Collection - ⌀75mm
by FritzPeppone · original on Printables ↗
Learning / Physics & Astronomy
♥ 455⬇ 1.3k🖨 17 prints
Print profiles
07_saturn_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
08_uranus_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
03_venus_atmosphere_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
10_pluto_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
01_moon_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
03_venus_surface_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
01_sun_large_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
09_neptune_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
01_sun_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
05_mars_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_earth_political_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
06_jupiter_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
02_io_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
02_mercury_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_earth_day_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_earth_fish_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
02_Mobile_Battery_Socket_D18_FLAT_no_support.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
02_Mobile_Battery_Socket_Drawer_D18.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
02_Mobile_Battery_Socket_D18_no_support.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
02_Mobile_Battery_Socket_D20.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
03Mobile_Solvinden_Socket_no_support.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
02_Mobile_Battery_Socket_D20_no_support.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
01_Mobile_Generic_Socket_no_support.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
02_Mobile_Battery_Socket_Drawer_D20.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
03_Mobile_Solvinden_Socket.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_Mobile_Keystone_Socket_no_support.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
01_Mobile_Generic_Socket_Lid.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
02_Mobile_Battery_Socket_D20_FLAT_no_support.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
02_Mobile_Battery_Socket_D18.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
01_Mobile_Generic_Socket.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
02_Mobile_Battery_Socket_D20_FLAT.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
02_Mobile_Battery_Socket_D18_FLAT.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_Mobile_Keystone_Socket.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
01_death_star_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
03_callisto_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_earth_political_bathymetry_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_earth_elevation_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
02_universe_expansion_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_earth_bathymetry_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_europa_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
05_ganymede_mobile.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
05_Mobile_Tea_Light_Socket_no_support.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
05_Mobile_Tea_Light_Socket.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_europa_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
05_ganymede_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
03_callisto_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
02_io_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
01_moon_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_earth_bathymetry_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_earth_day_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_earth_political_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_earth_political_bathymetry_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_earth_fish_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_earth_elevation_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
01_sun_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
01_sun_large_mobile_USD.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
02_mercury_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
03_venus_atmosphere_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
neptune_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
mars_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
10_pluto_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
07_saturn_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
08_uranus_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
06_jupiter_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
03_venus_surface_mobile_USD.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
07_saturn_rings.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print