Minimalistic Dock for Apple Watch - version 2.

Suitable for both USB-A and USB-C type chargers.

Model was tested with genuine Apple chargers: plastic and metal one. Both have similar diameter which is 27.8mm and 27.7 mm, with the depth of 6.2 mm and 6.6 mm.

In case your charging puck is 3rd party or for some reason has different dimensions, let me know so I will try to create and upload another version.

Printing statistics:

Used filament: 32 g

Printing time: 1h12m

Printing parameters:

Recommended material: PLA

Nozzle: 0.4 mm

Layer: 0.2 mm

Supports: none

Infill: minimum 25% (the higher the better, it adds nice weight to it).

Speed: normal

List of changes:

23 Feb 2026 - Model updated to v2

• redesigned slot for charging puck - easier inserting and tighter fit without double-sided tape;

• added tiny hole on the back for easy removal of the puck;

• wider cord channel that supports also new, braided cords;

• restyled base of the Dock;