I'm not gonna ask for a coffee, but please make sure you give me a like if you find this model useful.
My kids need space on their desks and a cool idea was to store their laptops under the table plate. I have found several models on Printables, but finally decided to made my own, since I had a few limitations:
- tableplates are from IKEA, made of pressed cardboard, so risky to use just a few thin screws (need several more screws to be sure laptops don't fall)
- laptops should be charged while under desk (charging port must not be covered)
- laptops have several dongles stucked into USB (USB ports must not be covered)
So, I built some brackets that fulfill those requirements. Printed in PETG, 5 perimeters and 30% infill, they are stable as hell :) You need 12 screws, I used M4 x 12mm, but any other similar screws will do.
The brackets are available in three lengths (178mm, 198mm and 238mm) and five openings (20mm, 23mm, 25mm, 28mm and 31mm).
Printing: Even the longest bracket can be printed on a 200mm bed. They can be printed in many orientations without supports. I printed them standing, as in the pictures, in PETG. If you have adhesion problems, maybe printing with a brim is not a bad idea ;)
The second bracket is not available here because you need to mirror it in your slicer! Here the green barcket is exactly the gray one mirrored along the Y axis:
BEWARE: When choosing the width make sure you select a bracket at least 2-3mm wider than your laptop height, measured at the thickest place (don't forget feet, thicker batteries etc.)!
Rugged Underdesk Laptop Mount
by D!nu · original on Printables ↗
Household / Office
♥ 739⬇ 1.9k🖨 7 prints
Print profiles
Bracket 31x198mm.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bracket 25x198mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bracket 31x178mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bracket 23x198mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bracket 20x198mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bracket 31x238mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bracket 20x178mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bracket 28x178mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bracket 28x238mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bracket 28x198mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bracket 23x178mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bracket 20x238mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bracket 25x238mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bracket 25x178mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bracket 23x238mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print