🖨️ Print Shop
TTF Slingshot

A simple but powerful hunting and shooting slingshot - through the forks (TTF).

Assembly BOM

  • 2x M5x20mm flat head screws
  • 2x M5 bolts
  • 1x Slingshot rubber band with pouch (Amazon)

Recommended ammo

  • Biodegradable clay spheres 8 - 10mm (Amazon)

Recommended print settings

  • Use dry filament to prevent stringing: ~30% hummidity
  • Material:
    • PLA - Layer height: 0.2
  • Wall loops/perimeters: 13
  • Top/Bottom layers: 7
  • Infill: 20% - 40%
  • Supports: none
  • (Optional) Skirt loops: 3

TTF Slingshot

by rmfms · original on Printables ↗

Sports & Outdoor / Outdoor Sports

♥ 765⬇ 1.9k🖨 14 prints

License: Creative Commons — Attribution — Noncommercial — NoDerivatives ↗fishingshootingcampingsportsoutdoorsgunsruberbandhuntingslingshootingsportstargetshootingtargetpracticeslingsot

Print profiles

  • Slingshot_right_clamp.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Slingshot_left_clamp.stlDEFAULT

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Slingshot_body.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print