Suggested Build Instructions:

Material - Atomic Filament Carbon Fiber PETG (Ideal for UV Resistance and Ductility)

https://atomicfilament.com/products/carbon-fiber-black-petg-pro

Other materials: PETG, ASA, ASA-CF, ABS, PLA (PLA may be too brittle for spring clamps)

Nozzle: 0.50mm

Bed Temp: 85c

Hotend: 255c

Extrusion Multiplier: 0.90

Layer Height: 0.20mm

Perimiters: 4

Infill: 25%, Rectilinear

Support: Paint-on, Triangles - Under Power Supply Tab, Wire Channel, and Router Catchment

Scaling Notes:

Every 3D printer is slightly different.  The Starlink power supply and router have an angled surface which is used to contain the components within the mount.  The fit should be concise, not overly loose or tight.  very subjective ;-)

On my printer I placed the model width-wise in X.  To adjust fitment for the power supply you would adjust slightly in Y ONLY (increments of 0.25mm) .  To adjust fitment for the router, you would adjust slightly in Z ONLY (increments of 0.25mm).  If the power supply catchment tab is out of place, you would adjust X ONLY (very unlikely)