Tips for printing:
- Supports: Yes (tree)
- Layer height: 0.16mm (optimal)
- Wall loops: 3
- Infill: 15%
- Seam position: back
- Wall generator: -
- Detect thin walls: -
- Brim: Yes
Colors and filament I used (4 Color Version):
- PLA / White - for the body and eyes
- PLA / Black - for the eyes, eyebrows and hoodie
- PLA / Orange - for the hoodie
- PLA / Pink - for the nose and ears
Or decide for yourself which colors and how many you want to use!
When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste! Because this model is very wasteful please keep that in mind!
Hoodie Cat
by 3DPrintyi · original on Printables ↗
World & Scans / Animals
♥ 299⬇ 1.3k🖨 12 prints
Print profiles
HoodieCat.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HoodieCat_Multicolor4ColorPrusaSlicerXL.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HoodieCat_Multicolor4ColorBambuStudioX1C.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HoodieCat_SingleColorColorBambuStudioX1C.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HoodieCat_SingleColorPrusaSlicerMK4.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print