Lenovo Tiny M720Q M720X M920X Top Cover Chassis Lid with 120 or 140mm Fan Opening

Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with the tamper switch pushing against it.

Warning - you'll probably snap all the clips off the edge of the front panel plastic like I did. Hence the epoxy :D

Print with Organic Supports painted on the front lip only, not needed anywhere else. Recommend PETG.

Printed on 0.6mm nozzle at 0.3mm layer height.

To Print

1x Top Cover
4x Pins

Hardware:

1x 2.5mm Hex Nut
1x 2.5mm bolt or screw for said Hex Nut
Epoxy adhesive

Highly recommend this grill made by @Sp4s12!

https://www.printables.com/model/7714-140mm-fan-protection-grill/files

Lenovo Tiny M720Q M720X M920X Top Cover Chassis Lid with 120 or 140mm Fan Opening

by David Fish · original on Printables ↗

Gadgets / Computers

♥ 69⬇ 757🖨 2 prints

License: Creative Commons — Attribution — Noncommercial ↗lenovotinyminimicro

Print profiles

Lenovo Tiny M720-920QX Top Cover with Fan Hole 120mm v0.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lenovo Tiny M720-920QX Top Cover with Fan Hole 140mm v7.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lenovo Side Pins v1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print