I downloaded and printed many 608 bearings. None of them satisfied me. Half printed balls were flying around in my printer or the bearing had too much play or other problems.
So, after a lot of experimenting, drawing, test printing and improving, I made it. The perfect bearing for me. The small ring under the balls serves as a support and needs to be removed. Make sure all the balls move freely.
Try it.
Use my Bambu 3mf file.
or adjust my settings.
No supports
0.12mm layer height
3 walls
random seam line
Good luck
another 608 Bearing
by Sascha · original on Printables ↗
Hobby & Makers / Mechanical Parts
♥ 278⬇ 1.6k🖨 15 prints
Print profiles
Kugellager608_mit_support.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
orcaKugellager608_mit_support.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print