Automatic support generation seems to work fine, use your discretion for what your printer can handle. Unlike the original version, the brace pieces can be printed flat on the bed. I used 6 top+bottom walls to add some stiffness.
BOM is the same as the original:
- 1 yellow Ender bed spring (8mm OD 20mm long)
- 1 M4x40 bolt
- 1 M4 nut
- 2 M5x30 bolts
- 2 M5 nuts
- Optional (for attaching butt pad):
- 2 m3x12 flat head screws
- 2 m3 nuts
Assembly is the same as the original
MCXish folding brace with extra beef
by Ypsilantea · original on Printables ↗
Sports & Outdoor / Outdoor Sports
♥ 64⬇ 750🖨 0 prints
Print profiles
Pad Thicc.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hinge Interface.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pad Short.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Brace Trimmed.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Clamp.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Smol Brace Trimmed.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print