Improved version with display installation from the inside (without frame).
_____________________________________________________________________________
Enclosure with 4 mm polycarbonate sheet panels https://a360.co/47jcXw3 . The purpose of the creation was to minimize the design and the likelihood of damaging the display by accidentally snagging it. Approximately 700 grams of plastic were used for printing.
The display is disassembled and installed through the frame with native screws in the Riser of the case. All the details are printed on the printer itself. A monolithic version of the Riser has been added. When printing, take into account the shrinkage of the material!
The front right part of the riser is made in two versions: for printing with supports, and with ribs, which need to be cut off after printing.
Front spacers are optional (there are problems with the rigidity of the parts), they are needed to cover the screen cable.
The door handle is available in two versions: for magnets D5x2, and for magnets from Vaporesso XROS evaporators (7x2x2.5 mm).
The parts are assembled with countersunk head screws M3x10 DIN 7991 and hexagon lock nuts DIN 985. Mounting to the printer frame on screws #6-32 UNC (screws for computer cases). Front door hinges - M3x8.
The photos show an early version.
Internal trays for essential tools.
_____________________________________________________________________________
Ещё одна версия зашивки под листовой поликарбонат 4 мм https://a360.co/47jcXw3 . Целью создания была минимизация конструкции и вероятности повредить дисплей, случайно зацепив его. Для печати затрачено приблизительно 700 гр. пластика.
Дисплей разобран и установлен через рамку родными шурупами в "Подъём" корпуса. Все детали печатаются на самом принтере. Добавлена монолитная версия “Подъёма”. При печати учитывайте усадку материала!
Передняя правая часть подъёма выполнена в двух вариантах: для печати с поддержками, и с рёбрами, которые после печати нужно срезать.
Передние проставки опциональны (есть проблемы с жёсткостью деталей), нужны что бы прикрыть шлейф экрана.
Ручка дверцы в двух вариантах: под магниты D5х2, и под магниты из испарителей Vaporesso XROS 7х2х2,5 мм.
Детали собираются винтами с потайной головкой M3х10 DIN 7991 и гайками со стопорным кольцом DIN 985. Крепление к раме принтера на винтах #6-32 UNC (винты для компьютерных корпусов). Петли дверцы M3x8.
На фото ранняя версия.
- Улучшенная версия с установкой дисплея с внутренней стороны (без рамки).
Внутренние лотки для инструментов первой необходимости.
Flashforge Adventurer 5M Enclosure
by Илья Палкин · original on Printables ↗
3D Printers / Other Printer Parts & Upgrades
♥ 342⬇ 2.3k🖨 2 prints
Print profiles
Spacer front right.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Spacer front left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Door handle d5x2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Door handle 7x2x2.5.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Spacer side.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Riser BR.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hinge static bottom.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Riser BL.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Screen frame.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hinge static top.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Riser FR Ribs.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hinge.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Riser FR Supports.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Riser FL.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Riser Monolith.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print