U will need:
Case - M2.5x10 self tapping screws X13
Pi - M2.5x6-8 self tapping screws X4
Mounting Case - M5x10 BHCS or SHCS X2-4
4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4
Here is a Accu Components link for all fixing listed above.
No supports are needed for this design.
Red faces can be removed for wire/ribbon access (see 3MF)
Raspberry Pi 5 Case
by Squirrelbrain · original on Printables ↗
Hobby & Makers / Electronics
♥ 1.3k⬇ 5.4k🖨 22 prints
License: Creative Commons — Attribution — Noncommercial — Share Alike ↗supportlessraspberrypiraspberrypihousingpi5rpi5
Print profiles
RPI5_print ready_no supports needed v1.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print