This the COOLEST way to hang keys in my opinion:
Parts to Print:
- Backplate - 1
- Main_body - 1
- hook - 1
- lifter - 1
- Pin Small - 1
- Pin - 1
- light_Right - 1
- light_Left - 1
Print Settings:
- Backplate: 15% Gyroid Infill, No supports
- Main_Body: 15% Gyroid Infill, Supports Everywhere, Set “Top Contact Z Distance” to 0.3mm. After the part has been printed remove supports gently and carefully.
- hook: 15% Gyroid Infill
- lifter: 15% Gyroid Infill, Supports Everywhere
- Pin Small/Pin, light_Right, light_Left: 15% Gyroid infill, Supports on Build Plate only
Assembley Instructions:
- For this build we would consider left and right as seen in the picture below:
Left and right lights are also shown in the picture.
- Now take the left light and place it such that extrusion marked in yellow is inside the slot, as shown in below two pictures
Make sure the extrusion in blue is facing the direction as shown in picture. Now press the light onto the shaft and make sure it rotates freely.
Do the same with right light.
- Now take the lifter and insert in the direction shown:
Now align the hole in middle of lifter with two holes inside the main body. Then take the Pin (larger one), and insert it in these three holes. You can also use small pliers to help with this step.
Enter the hook in the slot and use Pin_small to secure in place with the lifter.
- Now slide the backplate in the slot and enjoy your keyhanger.
Note: You can paint the popeyes and bumpers using paint markers similiar to shown in the picture below. I have added painting tool.stl to so you can easily paint the circular section of the popeye.
Also I have tested this model repeatedly and I am sure there will be no issues, but if you face any problems lemme know and I will fix them.
You can download double-hook version here:
https://www.printables.com/model/998506-double-hook-miata-popup-headlights-keyhanger
Miata POPUP Headlights Keyhanger - Single Hook
by Modulexe3D · original on Printables ↗
Art & Design / Wall-mounted
♥ 1.3k⬇ 2.5k🖨 14 prints
Print profiles
Pin Small.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pin.STLDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
lifter.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
hook.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
painting tool.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
light_Left.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Backplate.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
light_Right.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Main_Body.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print