Staying clean in the backcountry is vital to keep moving in comfort. With the backcountry bidet, you can keep the most sensitive parts of your body pristine and clean. Simply screw on to a water bottle, invert, aim, and gently squeeze!

Printing & Assembly Instructions

The model doesn't have to be waterproof, but it helps cut down on waste. Recommend printing with PETG, 0.2mm layer height, 6+ perimeters, and 10+ solid top & bottom layers. 

The gasket is optional (it helps create a better seal). If desired, it should be printed out of a flexible filament (I used NinjaFlex TPU, 95A). The gasket should be inserted such that the chamfers along the top of the gasket face bidet threads.