Simple, space efficient storage solution for small pliers/nippers/cutters/strippers used in electronics.
Two standard bins in the files, one fits up to 6 pliers with a grip thickness of up to 11.5mm (the right one in the photos) and another for up to 5 pliers with a grip thickness of up to 14.5mm (not pictured).
The third is a custom-ish one I made to fit my selection of pliers, it has 1x 14.5mm slot, 3x 13.5mm slots and one 17.5mm slot.
Easy enough to modify one to your needs, if the two standard bins don't work for you, the original Fusion files are included.
Printing tip: Once the bridge connecting two dividers starts forming, slow the printer down, the dividers do flex a fair amount before the bridge is completed.
About 80mm/s worked for me, technically, but YMMV. I got better results, a smoother print in the bridge area, at about 50mm/s.
Gridfinity Nippers Pliers Strippers Rack 2x2
by Toby N. · original on Printables ↗
Hobby & Makers / Organizers
♥ 726⬇ 2.5k🖨 29 prints
Print profiles
Pliers Nippers 1x14.5mm 3x13.5 1x17.5 2x2.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pliers Nippers 6x11.5mm 2x2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pliers Nippers 5x14.5mm 2x2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print