Tips for printing:
- Supports: Yes (tree)
- Layer height: 0.16mm (optimal)
- Wall loops: 3
- Infill: 15%
- Seam position: back
- Wall generator: -
- Detect thin walls: -
- Brim: Yes
Colors and filament I used (4 Color Version):
- PLA / White - for the eyes
- PLA / Black - for the eyes, nose and mouth
- PLA / Orange - for the feet, fur and ears
- PLA / Yellow - for the body and face
Or decide for yourself which colors and how many you want to use!
When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!
Cute Lion
by 3DPrintyi · original on Printables ↗
World & Scans / Animals
♥ 78⬇ 680🖨 4 prints
Print profiles
CuteLion.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CuteLion_Multicolor4ColorVersionBambuStudioX1C.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CuteLion_Multicolor4ColorVersionPrusaSlicerXL.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print