This is a pokeball which you can print with or without space for magnets!
I've included the following STL models:
- Inside halves no magnets (when you don't need them)
- Inside halves magnets (when you do want them)
- Lower shell ring button (for easier printing them in 1 color)
- Upper shell (same as the lower shell but without the button and ring)
3D PRINTING SETTINGS:
Layer Height 0.2mm PLA
15% Infill
Supports: YES, I used the automatic support painting + support enforcers only options (supports are placed in such a way they get hidden while assembling)
WHAT YOU NEED FOR ASSEMBLY:
- 2x M3*10 screw (for the hinge, backside)
- 4x magnets (5x2mm) [only with the magnets version]
.ZIP files included
Enjoy! Gotta catch them all!
Lifesize Pokeball!
by SorryForGrandma · original on Printables ↗
Art & Design / Other Art & Designs
♥ 940⬇ 4.7k🖨 32 prints
Print profiles
Inside halves no magnets.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lower shell ring button.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Upper shell.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Inside halves magnets.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print