A fidget toy shaped like a cute paw, using MX switches in each toe for satisfying clicks. it combines playful design with the tactile enjoyment of mechanical switches.

Requirements:
6X MX switch (recommended: Kailh Navy Box switches for their strong, satisfying click and heavy spring, but any MX switch should work).

Note:
The MX stem fits with a 90% success rate. If the fit is too loose due to under-extrusion, you can improve it by adding a piece of tape to the stem or printing it a bit smaller.

Printing Details:
This model is easy to print and requires no supports.
A premade brim for the MX stem is included and can be easily cut off (see images).

Print Settings: .12 Layer height, 15% infill, no brim, and no supports.

For Support and a Commercial license (selling physical prints) of this model, become a member of my Patreon:
https://www.patreon.com/MorphNest3D