KEEP YOUR MOST VALUABLE THINGS HIDDEN WHILE YOU TAKE A DIP INTO THE SEA.

NEW VERSION IMPROVEMENTS:

• LOCKER KEY FOR EXTRA SECURITY.
• NO THREADS  (sand gets stuck and blocks them sometimes)
• BETTER AIRTAG LOCKING CAP
• PRINT IN PLACE
• STRONGER HANDLE
• BIGGER AND POINTIER

It includes an AirTag compartment so you can bury it and find it with ease and a little print-in-place handle to carry it.

Share your prints!!

(ASA or ABS is recommended)

Assembly:

I used this 16mm locker key: https://amzn.to/4drbgi3 (This is an affiliate link)

1. INESRT THE SAND SHIELD ON THE LOCKER KEY

2. TIGHTEN THE LOCKER KEY FROM THE OTHER SSIDE WITH THE NUT

3. INSERT THE METAL LATCH AND TIGHTEN THE SCREW

THE LATCH NEEDS TO BE ALIGNED WITH THE KEY LIKE SHOWN, TO LOCK IN PLACE.

4. AND YOU ARE DONE!

Maybe you will need to help the cap come loose with some plyers.

Follow me on:

Instagram: https://www.instagram.com/afo3d/

TikTok: https://www.tiktok.com/@afo3d

Youtube: https://www.youtube.com/@AFO3D

Licensing

All my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.

If you want to sell my designs you can subscribe to my printables membership.

Reccomended Print Settings:

• Tree Supports
• 0.2mm layer height
• 6 walls on the handle and cap
• PETG for the Sand Shield

-AFO