A 1U rack-mount blank for 10-inch racks.

I've included three versions:

• A solid one.

• One with a honeycomb pattern.

• One with holes for ventilation or cables.

All are 2.5mm thick.

Updates

• (08 July 2026): I've added some blank variants that have extra functionality. So if you're looking for something more than a plain blank, check the models below.

  • Passthrough blank. This allows you to pass cables and other things from inside your rack to the outside, while also covering 1U.

  • Cable guide with modular hooks. This one is a 1U blank with hooks, with 50mm-100mm in size that can be used as a cable guide.

  • Passthrough blank with cable duct. This one is a 1U passthrough blank that has a duct, so you can pull cables from your rack and keep them hidden with a faceplate.

This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here.

Do you like my models? Consider buying me a coffee ;)

Print Settings

Supports:

No.

Resolution:

0.2 or 0.24

Walls/Perimeters:

At least 3.

Infill:

20% or more

Filament: 

PLA/PLA+/PETG/ABS/ASA/Nylon