When adding the Nevermore air filtration system and two additional the bed fans I wasn't happy with the cable management solutions that I found 😕. I started with designing these clips for the cable routing but that left me still missing a plug-in solution for the fan cables 🤔. Using Wagos seemed to be one option but they were taking too much space. So I designed this fancy little JST-Hub 😎.
It perfectly works for managing bed fan cable connections but of course can serve other use cases as well. Let me know what you use it for an post a Make 🙂!
Support me : Please leave a Like if you actually like and use this model. It does help a lot to get some of the filament that is needed for all the test prints while creating models to share with you! And check out my other models if you're building a Voron!
This is a stylish bed fan solution for your Voron printer which perfectly fits the Nevermore air filtration system. |
Modular Cable Management Clips for 2020 Extrusions This is a complete set of cable management clips for 2020 extrusion profiles as used for many Voron and other printers. |
Better Dock and Mount for the PCB Klicky Probe Optimized probe dock and mount adapter for your PCB Klicky probe. |
A DIN rail mountable case for your BTT Octopus Pro which allows to mount two fans ... and is just looking cool :-) |
BTT HDMI 5 Display Voron Mount (Works with Clicky Clacky Door) A Voron display mount for BTT HDMI5 compatible with Clicky Clacky Door (and standard doors). |
Modular Mesh Inserts for the Voron Fan Grille This is a set of mesh inserts and retainers to add some protection and (of course) a nicer look to your Voron printer. |
Plug-In Mesh Mesh Inserts for the Voron 2.4 and Trident Skirts Mesh inserts that can be clipped into your standard Voron 2.4 and Trident skirts - now in 250, 300 and 350 versions :-) |
Assembly Instructions
BOM
- JST-XH connectors of your choice (XH2P and/or XH4P)
- M3*8 SHC (2x)
- M3 T-Nut (2x)
Printing
Use your standard Voron settings. And I would recommend to add some support on the long bridge at the end of the hub's opening.
Assembly
Well, actually the assembly steps are straight forward (follow the pics even though they are not showing the latest version - the hub shown is missing the recess for easier opening):
- Keep wires long enough to allow for soldering, and short enough to get them into the hub.
- Check for the orientation of the JST connectors and solder the wires on the the “top side” of the pins - the side which is marked red in the CAD drawing. Otherwise you might have trouble to insert the JSTs into the hub. (Click on the image to enlarge)
- And there is a diagram on the model which tells you how it is intended to connect the wires.
That's it! 😎
JST Hub for 2020 Extrusions - Wiring Bed Fans, LEDs and more!
by DET-Man · original on Printables ↗
3D Printers / Voron Parts & Upgrades
♥ 362⬇ 13.0k🖨 6 prints
Print profiles
JST Hub - Case - 1xXH4P-3xXH2P.stlIN STOCKDEFAULT
⏱ 32m · 11 g · 17 × 60 × 42 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print
JST Hub - Cover 2xXH2P.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
JST Hub - Cover 3xXH2P.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
JST Hub - Case - 2xXH2P-3xXH2P.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
JST Hub - Case - 1xXH2P-2xXH2P.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
JST Hub - Case - 1xXH2P-3xXH2P.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
JST Hub - Case - 1xXH4P-2xXH2P.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
JST Hub - Case - 1xXH3P-3xXH3P.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
JST Hub - Cover 3x3XHP.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print