Desk Stand for the Unifi U7 Pro Wall from Ubiquiti. It's similar to the aluminum premium desk stand that Ubiquiti sells, but of course, like all its offerings, it's always out of stock.

I created this because I wasn't sure if I wanted to wall mount the U7 Pro Wall.

Usage:

• Use four M3 bolts to attach the metal plate to the U7 Pro Wall. The bolt length is best at around 5mm, but I used 10 mm, and everything worked fine.
• Print it sideways; see the picture I attached. 
• Print details:
  • Print in PETG, ASA, ABS (anything that works better with high temperatures)
  • Use infill of at least 50%. I used a Gyroid pattern. It works fine.
  • Use a brim because it's large.
  • Use tree support, and you don't need any blockers. The slicer will handle everything else.