For final assembly, you will need two M8x50 bolts, two nuts, a 35mm wide and 0.5-1 m long sling, as well as a metal half-ring At both ends of the sling, sew a loop so that a bolt can be inserted into it. After that, insert this loop into the hole on the handle, pierce the bolt from above, place the nut inside and tighten it.
Armwrestling training handle
by pechatnow · original on Printables ↗
Sports & Outdoor / Other Sports
♥ 26⬇ 528🖨 0 prints
Print profiles
Armwrestling Training Handle.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Armwrestling Training Handle_no_caption.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print