Beach umbrella sand anchor
Needed a sand anchor for my beach umbrella. Picture from the hot sand on a beach in Spain.
Fits umbrella poles up to about 24mm (the hole is 25mm but I would expect some expansion in the printing process).
How to print
Print both parts upside down (see slicer picture below). No supports should be necessary.
Preferably use a filament that will withstand hot sand. I used PETG and 6 walls for the example. Use many walls to make it sufficiently strong.
The print height when printing upside down is ~348mm
Beach umbrella sand anchor
by floano · original on Printables ↗
Seasonal designs / Summer
♥ 126⬇ 559🖨 1 prints
Print profiles
UmbrellaSandAnchor_Bolt.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
UmbrellaSandAnchor.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print