Since I lost the original bezel on the first day, I have designed a 3D printable replacement with different bezel styles:
- Flat. The bezel is a flat surface with a sharp edge on the outer diameter
- Fillet. Has a fillet on the outer diameter
- Chamfer. Has a chamfer on the outer diameter
- Big chamfer. The bezel is 1mm above the screen with a chamfer on the outer diameter
The model has small pins for the locking mechanism, Â which has no supports, and depending on print quality some cleaning may be required. Based on my experience PLA works better than PETG. Also, the bezel can be too tight at the beginning, but after a few turns, it should be OK. Â
I didn't have an original bezel during the design process, so the model was made by trial and error method which means, that it is not perfect compared to the original CMF part (Hopefully they will release a 3D model of it)
Feel free to improve and modify it to your taste
CMF Watch Pro 2 Bezel
by Daniil Danilov · original on Printables ↗
Gadgets / Portable Devices
♥ 157⬇ 1.9k🖨 15 prints
Print profiles
Bezel With Lock chamfer.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bezel With Lock Fillet.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bezel With Lock flat.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bezel With Lock chamfer big.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print